Amprobe AT-5000 Manual De Uso página 20

High Frequency: 82kHz
‘
Power: 50Hz, 60Hz
‘
RF: ALL RF frequencies
‘
• Push the 4-way navigation button (up/Down/Left/Right) to highlight the frequency menu.
• Push the Select button to open the frequency menu
• Push the 4-way navigation button (up or down) to select Low, Mid, High, Power, RF frequency range.
• Push the 4-way navigation button(Left or right) to move to the frequency values
• Push the 4-way navigation button(up or down) to toggle through the values
• Push the Select button to activate or deactivate a value
• Push Use button to confirm your choices
• Push Back button to return to the previous menu interface or cancel the changes
NB. Deactivating frequencies does not permanently remove them from the R-5000 receiver. Access the frequency menu to
reactivate them.
Activated frequencies can be selected from the operational interface by Pushing the <Freq> soft key. Selecting fewer
frequencies allows faster toggling between frequencies from the operational interface.
18