Multi-Use Slicer - SEVERIN AS 3950 Instrucciones De Uso

Dear Customer,
Before using the appliance, the user must
read the following instructions carefully.
Familiarisation
1. Stainless steel blade
2. Blade mounting
3. Power cord
4. Finger guard
5. End-piece holder
6. Sliding tray
7. Base plate
8. Locking button
9. Sliding tray inside storage compartment
10. End-piece holder inside storage
compartment
11. Recess for power cord
12. Power cord storage
13. Slide lock
14. Th ickness selection knob
15. Slice thickness indicator
16. Rating label (on underside of the unit)
17. Stop plate
18. Slicer assembly (stop plate and blade)
19. Push switch
20. Release button (at the rear)
Connection to the mains supply
Make sure that the supply voltage corresponds
with the voltage marked on the rating label.
Th is product complies with all binding CE
labelling directives.
Important safety instructions
Unpack the appliance completely and
remove any protective foils etc.
Before the appliance is used, the main body
as well as any attachment fi tted should
be checked thoroughly for any defects.
Should the appliance, for instance, have
been dropped onto a hard surface, it must
not be used any longer: even invisible
damage may have adverse eff ects on the
operational safety of the appliance.

Multi-use slicer

Th e power cord should be regularly
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive
force has been used to pull the power
cord. Damage cannot always be detected
from the outside; the entire unit should
therefore be checked by a qualifi ed
technician before it is used again.
Th is appliance is not intended for use
by any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning
the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Caution: keep any packaging materials
well away from children, as they are
a potential source of danger e.g. from
suff ocation.
Do not allow the slicer to come into
contact with open fl ames or any hot
surface such as hotplates.
Do not operate the slicer if
- the unit or its power cord show any
signs of damage,
- the appliance has been dropped on to a
hard surface, perhaps causing internal
damage,
- the sliding tray, stop plate or base plate
have not been correctly fi tted.
For safety reasons, always bring the stop
plate back to its rest (zero) position aft er
use, so that it is fl ush with the blade.
We strongly
appliance is only used with the sliding tray
and end-piece holder properly installed
and in position. Exceptions may be made
only if required by the size or shape of the
food to be sliced.
Always remove the plug from the wall
socket
-
aft er use,
-
in case of any malfunction,
8
recommend that the