Correct Weighing; Switching The Weight Display; Automatic Switch-Off/Economy Mode - Seca 703 Manual De Instrucciones Y Garantía

Correct weighing

– Press the Start key.
se(a 8. 8 . 8 . 8 . 8 .
,
secutively in the display. The scale is
then automatically set to zero and ready
to use.
– If necessary, switch the weight display
(see page 18).
– Stand on the scale and keep still.
– Read the weighing result off the digital
display.
– If a load greater than 250 kg or 550 lbs
is placed on the scale,
the display.

Switching the weight display

The weight display can be switched between kilogrammes (kg) and pounds (lbs) or be-
tween kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.

Automatic switch-off/economy mode

The scale automatically detects whether it is being operated on rechargeable batteries
alone or whether it is connected to the mains.
– With rechargeable battery operation: automatic shut-down after 30 seconds.
– With mains operation: shut-down only via keypad.
18
0. 0
and appear con-
St0P
appears in