Topcom Butler 2505C Manual De Uso página 28

HANDL. B2505C_10_C_v3.qxd 28-01-2003 11:15 Page 28
ENGLISH
3.3 CHOOSING MENU LANGUAGE
1. Enter the menu by pressing
2. Select Handset using the
3. Press OK.
4. Select LANGUAGE using the
5. Press OK.
6. Select the language of choice by means of the
7. Press OK to validate.
4. SUBSCRIBING A HANDSET
Note:
Before you can make a phone call, every new handset needs to be subscribed to a base unit.
Unless this handset has been delivered as an extra handset of a TWIN or DUO pack.
4.1 SUBSCRIBING TO A BUTLER 2505/2510/2550/2605/2610/2650/2705/
2710/2750
To register any handset, the base must be put into a special registration mode:
1. Press and hold the paging key
2. The base will then emit a beeptone. The base is now ready to register a new
handset. You have 90 seconds after pressing the button to register a new
handset..
After putting the base into registration mode, start the procedure on the new
handset:
3. Enter the menu by pressing
4. Select REGISTER using the
5. Press OK.
6. Enter a base number ( from 1 to 4 ). The flashing numbers are already in use.
7. Press OK.
8. Enter the BASE PIN code (0000 by default).
9. Press OK. The handset will start searching for the DECT base.
10. If the handset has located the base, it will display the base identification.
number, validate the base registration by pressing OK or stop by pressing
11. If the handset does not locate the base, it will return to the standby mode
after a few seconds.
28
/OK.
and keys.
and keys.
and
of the base for 6 seconds.
/OK.
and keys.
down keys.
,
Topcom Butler 2505C/2510C