Publicidad
Idiomas disponibles
Idiomas disponibles
11
Dishwasher
Electrical
Rating
Volts
Hertz
Amperes
Watts
120
60
12
1,440
(max)
Grounding
Instructions
The dishwasher must be properly grounded before operating. This appli-
ance must be connected to a grounded metal permanent wiring system or
an equipment grounding conductor must be run with the circuit conductors
and connected to the equipment grounding terminal or lead on the dish-
washer. Make sure that the dishwasher is connected to a suitable ground
in compliance with all local codes or, in the absence of a local code, with
the NATIONAL ELECTRICAL CODE in the United States or the CANA-
DIAN ELECTRIC CODE C22.1-1atest edition in Canada as well as any
provincial/state or municipal or local codes that apply.
Note: Installations
employing
a Receptacle
The accessory cord kit (Model # SMZPC002UC) designed for connection to
a receptacle is not provided, but can be ordered through Customer Service
by calling 1-800-944-2904.
Make sure the household receptacle meets the
electrical supply requirements
as well as national and local codes. If you
choose to permanently connect to hardwiring, follow the next steps.
2"-3"
3/8"-1/2"
.__
k'-
(10 mm - 13 mm)
Turn off any electricity
to installation area.
Remove screws and cover from junction box (A) and set aside for later use.
Remove
outer casing
and insulation
of the hardwiring/power
cord as
shown.
Publicidad
