Oki PT390 Guia Del Usuario página 72

10. Select "SAVE&END" as your option.
Press the FEED switch briefly (one second or less) until the item
"SAVE&END" is reached.
Then, press and hold down the FEED switch for one second or longer to
accept the selection.
The printer cuts the paper and exits from setup mode when you accept the
selection of "SAVE&END."
Note: If you turn off the printer power switch without first selecting
"SAVE&END," your setting will be lost.
- Verifying your setting
To verify your setting, execute a test print, referring to Section C-1.
The test printing prints a list of printer settings. Check the list,
and verify your setting.
SAVE&END
↑
DEFAULT SET
↑
SETUP PRINT
↑
SETTING
SAVE&END
DEFAULT SET
SETUP PRINT
SETTING
SELECTION ITEM
70