2. AC Adapter and Thermal Roll Paper
2-1. AC adapter
Only use the AC adapter specified below.
Model name:
Input:
Output:
Caution: Only use authorized AC adapters.
Caution: Do not use the bundled AC adapter and Power cable for any
2-2. Paper specification (Thermal paper)
Be sure to use thermal roll paper that conform to the following specifications.
- Paper width: For paper 83mm wide, 83
- Outside diameter:
- Core diameter:
- Printed surface: Outside of the roll
- Treatment of end of paper:
Note: Do not use rolls that have rough sides or sides from which pieces of paper
extrude. Using such rolls could cause a printer failure.
KA02951-0120
100 to 240V AC, 50/60Hz-
DC24V±5%, 1.5A
electrical equipment other than this printer.
For paper 60mm wide, 60
For paper 75 to 90µm thick, 102mm or less
For paper 90 to 150µm thick, 90mm or less
For paper 75 to 90 m thick, 12±0.5mm (inside)
/18±0.5mm (outside)
For paper 90 to 150µm thick, 25.4±0.5mm (inside)
/32±0.5mm (outside)
end of the paper must also not be folded back.
0
mm 80mm wide, 80
-1.0
0
mm 58mm wide, 58
-1.0
The roll paper must not be glued to the core. The
6
0
mm
-1.0
0
mm
-1.0