Ambient Temperatures - Avintage R600a Instrucciones De Uso

For this reason, we recommend choosing the appropriate kind of wall and floor surfaces in the
device's installation area so that humidity or the possible formation of water do not cause any
damage.
CONNECTION TO THE ELECTRICAL POWER NETWORK
Be sure to read and understand the safety instructions indicated at the beginning of this guide.
If the wine cabinet was tilted very much during its transport or placement, it is important to leave the wine
cellar in the vertical position for 24 hours before connecting it so that the lubricating oil can descend and
accumulate in the compressor.
Otherwise, the cooling system could completely break down.
Refer to the safety instructions mentioned at the beginning of this guide !
Your wine cellar is equipped with a connecting cable and a power plug for a 230 V/50 Hz single phase
power network (CE standard). It must be connected to an earthed wall outlet with a minimum protection of
10 A.

AMBIENT TEMPERATURES

Extreme ambient temperatures (hot and cold) can alter the device's performances, and the
possible and desired temperatures may not be obtained.
IMPORTANT : Be careful to not exceed the following minimum and maximum ambient values
retained for a good operation of your device
UTILIZATION
DOOR TYPE
AMBIENT
TEMPERATURE RANGE
TO RESPECT
TEMPERATURE
SETTING AVAILABLE
WINTER SYSTEM ?
MONO TEMPERATURE WINE CELLAR
AGEING
265 315
Glass
0-35°C 0-35°C
11-13°C 11-13°C
Yes Yes
265 315 265
Plain
0-35°C 0-35°C
11-13°C 11-13°C
Yes Yes
CONDITIONNING
315 265
Glass
0-35°C 0-35°C 0-35°C
8-18°C 8-18°C 8-18°C
Yes Yes Yes
315
Plain
0-35°C
8-18°C
Yes
41