Cepex CPC004 Instrucciones De Instalación Y Operación página 14

INSTALLATION AND
CONNECTION INSTRUCTIONS
4. Programing the Controller
4.1 General
The AC-GQ controller has three irrigation programmes – A, B, C.
In addition, the X Support program can be activated.
Multi-valve Irrigation Program
Three programs can be entered – A, B, C
In each program irrigation days are selected on which all the valves allocated to the program
are activated. A start-time is set only for the first valve, with the duration of irrigation being
defined for each valve separately. The valves are opened in sequence per their number as
shown on the display panel when the first valve shuts down the second one opens up and so
on. At any one time only one valve operates. If the three programs are entered (A + B + C)
with irrigation times which overlap, program A will open first and only after it has shut-down
will program B open with program C opening last of all.
A valve can be allocated to any program, with differing durations under each program.
General explanatons :
The controller is programed with the aid of a 10 mode selector and 5 buttons.
- switch button - for moving through the various display modes
- selection button – selects the data which is about to be changed, (for example: hour,
minute and so forth)
- program button – moves between programs A, B, C and X in repeating order
- increment button – increases the value of the selected parameter (for example, adds
one hour)
- decrement button – reduces the value of the parameter selected, (for example, detracts
one hour).
RESET
BUTTON
1 2
EN