Important - ROSSMONT Waver Master WR-2CH Manual Del Usuario

PASSWORD
Password to access SSID
UPDATE FIRMWARE
IMPORTANT: for this operation the device COULD necessarily erase all custom data and bring the unit to factory
default configuration. Please refer to release note to understand if this will occur before making any change.
This updates the internal flash memory of the device. The firmware contains all the hardware instructions and it's
important to keep this updated with the latest version recommended by Rossmont.
New firmware versions could contain improvements for existing products, general hardware improvements, bug fixes,
and/or even the required informations to drive new Rossmont devices.
Visit the www.rossmont.com
UPDATE SOFTWARE
This update only the software with latest improvements and it's important to keep this updated with the latest version
recommended by Rossmont.
This "soft" update will not erase the custom data inserted, including graph and configurations.
Visit the www.rossmont.com
HELP
It contains the full instruction manual of the product. When a new firmware or software version is released, a new
instruction manual version is released too and it will be automatically included under this section.
RESET TO FACTORY DEFAULT
It resets the unit to factory default configuration.
User and password are set to:
USER: rossmont
PASSWORD: waver
Every slave connection is interrupted and the wifi connection mode is brought to DIRECT ACCESS.
The device IP is set to 192.168.9.75
SAVE
This saves all the customizations in configurations
CLOSE
It brings back to the main screen
ADD A NEW PRODUCT
Please connect the Rossmont device to the channel extension cable socket.
–
Click on "ADD PRODUCT" (during this process the unit will automatically search for additional Waver Slave
–
channels)
Select the correspondent model of device you're connecting
–
IMPORTANT: Do not attempt to operate a different model than the one actually connected
Assign a description which will help you to recognise the product in case of multiple devices connected
–
You can delete the added product by simply clicking on the
–
You can show on/off the graph curve of the device by simply clicking on the
–
Doc Rev. 2
Firmware Ver. 1.0.+
Software Ver. 1.0.+
download area section to freely download the latest firmware version.
download area section to freely download the latest software version.
INDEX
icon
icon
Pag. 10/71