Configuration (Menu) - ROSSMONT Waver Master WR-2CH Manual Del Usuario

SOFTWARE
Once you've completed the login procedure the main screen will appear (see below an example).

CONFIGURATION (MENU)

GENERAL
Set time
LOGIN CREDENTIALS
To set custom user and password for a safe access to the unit
NETWORK SETTINGS:
Allows to change the machine IP address and to configure an external remote access. The use of DHCP determines if
the IP (with WIFI mode set to INFRASTRUCTURE) is automatically set to fit the current local area network (LAN).
WIFI SETTINGS
Wifi mode:
DIRECT ACCESS: set by default. The unit broadcasts its own SSID (wifi network name) and devices can connect
–
directly to the unit
INFRASTRUCTURE: the unit can be inserted into an existing LAN (router required) and it's possible to access it
–
remotely if the LAN is connected to Internet (modem required).
WIFI CHANNEL
Allows to change the integrated wifi module transmission channel
PROTECTION
Switches between SSID password encryption modes
SSID
Name of the wifi network broadcast by the Waver
NOTE: It's recommended to customize this parameter especially if you have to manage more Master units
Doc Rev. 2
Firmware Ver. 1.0.+
Software Ver. 1.0.+
INDEX
Pag. 9/71