Quick Setup - ROSSMONT Waver Master WR-2CH Manual Del Usuario

Firmware Ver. 1.0.+
Software Ver. 1.0.+
INDEX

QUICK SETUP

1 – Plug the power cord into wall socket
2 - The system does a fast auto-checkup and the 3 LEDs will pulse. Wait until the central white LED is stable.
3 – With your PC / Tablet / Smartphone Wifi turned on, view the list of available networks. Connect to Waver's Wifi
Network Name (e.g. "Rossmont...")
4- Open your web browser (e.g. Chrome, Safari, Firefox, etc...) and ensure it is updated with the latest version
5- Go to the address bar and type the following address:
http://192.168.9.75
6- Once the login screen appears, type user and password as following:
USER: rossmont
PASSWORD: waver
Once you've completed the login procedure the main screen will appear.
Enjoy your new Rossmont Waver
NOTE
: To hard reset the Waver (in case you lost your user or password), follow steps 1 to 2 then tap and hold the
central capacitive button for 20 seconds.
IMPORTANT
The complete product manual is included in PDF format under CONFIGURATION -> HELP or it is freely
:
downloadable from www.rossmont.com under SUPPORT -> DOWNLOAD area section.
Doc Rev. 2 Pag. 7/71