Test Mode - ROSSMONT Waver Master WR-2CH Manual Del Usuario

Firmware Ver. 1.0.+
Software Ver. 1.0.+
INDEX
PRESETS OPTIONS
Presets can be assigned to more than one pump simultaneously by flagging the checkbox of the correspondant name.
In addition to regular operation, a preset can also operate INVERTED: by flagging this checkbox, the selected pump will
be "mirrored" on the basis of a 50% power line (middle of the vertical Y-AXIS).
e.g. A FIXED preset is set to 20%. With INVERTED checkbox flagged the pump will operate to 80%.
Each preset is customizable with a different color selectable from the color palette on the right.
Once completed the customization of a preset click on SAVE button to apply it on the graph.
To delete a preset, click on EDIT and then on DELETE
To exit from presets editor click on CLOSE.
MANUAL FISH FOOD
This button is an easy-to-access manner to bring all the connected pumps at minimum level for the feed operation.
It's set for a standard duration of 5 minutes then the unit automatically continues the program.

TEST MODE

This mode lets you check if the pumps have been set as you desired. By clicking this button the whole 24h program will
be reproduced in 5 minutes.
After this period the unit automatically continues the program.
Doc Rev. 2 Pag. 13/71