Hitachi CD 12F Instrucciones De Manejo página 8

English
SPECIFICATIONS
Max. Cutting Capacity
Height × Width
Cutting Angle
Input
No-Load Speed
Weight
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) TCT saw blade (305mm, NT50) ............................. 1
(mounted on tool)
(2) Wrench ........................................................................ 1
(3) Protective goggles ..................................................... 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES
(sold separately)
(1) TCT saw blade (305mm, NT60)
Optional accessories are subject to change without notice.
APPLICATION
Cutting various types of metallic materials such as
Steel pipes, Rectangular pipes, Shaped Steel and
Round bars.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the
trigger switch is in the ON position, the power tool
will start operating immediately, inviting serious
accident.
3. Extension cord
When the work area is removed from the power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be
kept as short as practicable.
4. Since movable portions are secured by tension of
a chain while in transit, remove the chain from the
chain hook by slightly depressing the handle.
7
Steel Pipe
Rectangular Pipe
Shaped Steel
Round Bar
ø115mm
100mm × 100mm
75mm × 125mm
ø32mm
0° – 45°
1450W*
1350/min
ADJUSTING THE POWER TOOL PRIOR TO
USE
CAUTION
Make all necessary adjustments before inserting the plug
in the power source.
1. Check to see that the safety cover operates smoothly.
(1) Make sure the safety cover moves smoothly
when the handle is in the down position.
(2) Next, check that the safety cover returns to the
original position when the handle is raised.
2. Make sure the spindle lock used for mounting and
dismounting the saw blade is removed.
3. Make sure the saw blade is fixed firmly in place.
4. Check facial deflection by rotating the saw blade.
If there is too much facial deflection, the lifespan
of the blade will be shortened and cutting precision
will deteriorate.
PRACTICAL APPLICATIONS
WARNING
It is dangerous to remove or install the workpiece
while the saw blade is turning.
1. Switch operation.
After pushing the lock-of button with the thumb,
the saw blade rotate when the trigger switch is
pulled, and stop when the trigger switch is released.
2. lnstructions for one-touch vice (Figs. 3 and 4).
(1) When the grip is in the upright position (Fig.
3), if the screw handle is pushed and pulled, vice
(A) moves forward quickly.
(2) When the grip is in the down position (Fig. 4),
if the screw handle is turned, vice (A) can be
moved.
NOTICE
If the grip cannot be put in the down position, turn
the screw handle slightly.
3. Fix workpiece.
(1) Place the workpiece in vice (B) and push the
screw handle so that the grip is in an upright
position (Fig. 3); then push vise (A) slightly
against the workpiece. Next, push down on the
grip and turn the screw handle so that the
workpiece is fixed tightly. (Fig. 4)
(2) All workpiece must, of course, be fixed in the
vise as securely as possible.
19kg