Radio Operations - Fiat CLARION PU2312 Manual De Instrucciones

Radio Operations

Radio mode
Seek tuning indication
Listening to the radio
1. Press FNC button 3 to select radio mode. The
frequency or PS appears in the display.
* PS: Programme Service Name
2. Press BND button
band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (OM/OL) ➜ FM1 ...
3. Select left or right to tune in to a desired station
using SRCH buttons $.
Tuning
Three tuning modes are available: seek tuning,
manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable
broadcast stations; LOCAL SEEK can tune in to
only broadcast stations with a good reception
sensitivity.
1. Press BND button # and select the desired
band (FM or AM (MW, LW)).
2. Tune into a station.
* If "MANU" is lit in the display, press and hold
BND button # for 1 second or longer. "MANU"
in the display goes off and seek tuning is now
available.
* If "TA" is lit in the display, TP stations are auto-
matically sought.
10
TP indicazion
#
to select a band. The
Preset channel indication
● DX SEEK
Press the SRCH Left/Right button $ to auto-mat-
ically seek a station.
When the SRCH Right button $ is pressed, the
station is sought in the direction of higher fre-
quencies; if the SRCH Left button $ is pressed,
the station is sought in the direction of lower fre-
quencies.
* When seek tuning starts, "DX" appears in the
display.
● LOCAL SEEK
If you press and hold the SRCH Left/Right button
$ for 1 second or longer, local seek tuning is car-
ried out. Broadcast stations with good reception
sensitivity are selected.
* When local seeking starts, "LO" appears in the
display.
Manual tuning
1. Press the BND button #
2. Press the BND button # for at least 2 seconds.
3. "MANU" disappears on the display, and manu-
al tuning is possible.
4. Use the SRCH Left/Right button $ to tune in
stations.
* The mode automatically switches back to the
seek tuning mode after 7 seconds.
to select the band.