Fiat CLARION PU2312 Manual De Instrucciones página 16

Seek tuning of PTYs
1. Press PTY button 8 to enter PTY select mode.
2. Select a PTY.
3. Select the SRCH Left/Right button $, when a
receivable and desired PTY is found. It is auto-
matically tuned in. If you select left or right, the
PTY is sought in the direction of a higher or
lower frequency channel.
If no stations broadcasting selected a PTY,
seek tuning stops at the previous station and
the unit stays in PTY standby mode.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA,ALARM and PTY interrupts
can be set during TA,ALARM or PTY interrupt.
The factory default is "15"
During a TA,ALARM or PTY interrupt, turn the
Rotary knob # clockwise or counterclockwise to
set the volume to the desired level ( 0 to 33)
* When the TA,ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.
RDS Operations
15