Rds Operations - Fiat CLARION PU2312 Manual De Instrucciones

RDS Operations

RDS mode
Seek tuning indication
AF indication
REG indication
TA indication
RDS (Radio Data System)
This unit incorporates an RDS system decoder for
use with stations broadcasting RDS data.
This system enables the radio to display the name
of the station being received (PS), and also to
automatically switch to a better frequency when
one is available while you are traveling great dis-
tances (AF switching).
It can also interrupt a CD or tape with traffic infor-
mation or the programme type broadcast by an
RDS station.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and inter-
ruption of the station being received with traffic
information from other stations (TP). This function
may not work in some regions.
To use the RDS function, be sure to set the radio
to FM mode.
• AF:
Alternative Frequencies
• PS:
Programme Service Name
• PTY: Programme Type
• EON: Enhanced Other Network
• TP:
Traffic Programme
* If an RDS station can no longer be received
clearly (at the current location), "AF" flashes in
the display. When reception is restored, "AF"
stops flashing.
AF function
The AF function enables the unit to maintain opti-
mum reception by switching to different frequen-
cies on the same network.
* The factory setting is "on".
12
Preset channel indication
PTY indication
TP indication
● Turning AF function off
When "AF" is lit or flashing in the display, press
AF button 9. "AF" in the display goes off and AF
turns off.
● Turning AF function on
When "AF" is not lit in the display, press AF but-
ton 9 again. "AF" lights in the display and AF
turns on.
If the receiving condition of a station being tuned
is getting worse, "AF" starts flashing and the unit
tries to switch to an alternative frequency. If
switching cannot be performed, the display
switches to "SEARCH" and the unit searches for
the same programme.
REG (Regional Programme) function
When REG function is on, regional station recep-
tion is optimized.
If this function is off, the unit switches in to the
regional station in the next local area when you
enter the next area while receiving the regional
station in the previous local area.
* The factory setting is "off".
Notes:
• This function is ineffective when a national station
such as BBC 2 FM is being received.
• The on/off setting of REG is effective when AF is
on.
● Turning REG function on
When "REG" is not lit in the display, pressing and
holding AF button 9 for 2 seconds or longer.
"REG" lights in the display.
● Turning REG function off
Pressing and holding AF button 9 for 2 seconds
or longer again, "REG" in the display goes off.