Recalling A Preset Station; Manual Memory; Preset Scan - Fiat CLARION PU2312 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 95

Recalling a preset station

Up to 24 stations (6 each for the FM1, FM2, FM3
and AM (MW/LW) stations) can be preset in the
Preset buttons.
Preset tuning is a function for storing stations to
Preset buttons (1 to 6) which enables you to
select a station by pressing the corresponding
preset button.
1. Press BND button # to select a band.
2. Press one of Preset buttons
stored station.
Note:
• Press and hold Preset button ! for 2 seconds or
longer to store the station currently being received
(preset memory).

Manual memory

1. Press BND button # to select a band.
2. Select left or right to tune in to a desired station
using SRCH buttons $.
3. Press and hold one of Preset buttons ! for 2
seconds or longer to store the station currently
being received.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially.
Notes:
• The only FM band that can store stations is FM3.
If you try to store stations in FM1 or FM2, the sta-
tions will automatically be stored in FM3.
• When the auto store is performed, the station pre-
viously stored in the memory at that position is
overwritten.
• If there are fewer than 6 stations with good recep-
tion, the stations previously stored at the remain-
ing Preset buttons are not overwritten.
• A station already stored in one of Preset buttons
cannot be stored in another Preset buttons.
1. Press BND button # to select a band (FM3 or
AM) of the desired station.
2. Press and hold AS button 0 for 2 seconds or
longer. The stations with good reception are
stored automatically to Preset buttons !.

Preset scan

This function scans through each preset station
for 7 seconds sequentially.
This is useful when you want to search for a
desired station.
Note:
• Take note that if you press and hold PS button 0
for 2 seconds or longer, the auto store function
goes into effect and the unit starts storing stations.
!
to select a
1. Press PS button 0
2. When a station that you want to listen to is
Mute
Use this function to turn off the sound immediate-
ly.
Press the MUTE button ¥. The sound turns off
and "MUTE" appears on the display. Press the
MUTE button again to cancel the mute mode.
tuned in, press PS button 0 again or the cor-
responding Preset button ! to stop preset
scan.
* A station that cannot be tuned in to is skipped
and the next preset station is tuned in.
Radio Operations
11

Publicidad

Tabla de contenido
loading

Tabla de contenido