Belkin F5D8233-4 Manual Del Usuario página 30

Alternate Setup Method Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection
Type to Dynamic IP
A dynamic connection type is the most common connection type found with
cable modems. Setting the connection type to "dynamic" in many cases is
enough to complete the connection to your ISP. Some dynamic connection
types may require a host name. You can enter your host name in the space
provided if you were assigned one. Your host name is assigned by your ISP.
Some dynamic connections may require that you clone the MAC address of
the PC that was originally connected to the modem.
1. Host Name (1)
This space is provided to enter a host name that needs to be
visible to your ISP. Enter your host name here and click "Apply
(3)
Changes"
are not sure, leave this blank.
2. Change WAN MAC Address (2)
If your ISP requires a specific MAC address to connect to the
service, you can enter a specific MAC address or clone the
current computer's MAC address through this link.
. If your ISP did not assign you a host name, or you
(2)
28 28
(1)
(3)