Belkin F5D8233-4 Manual Del Usuario página 36

Alternate Setup Method Alternate Setup Method
Setting your Connection Type if you are a Telstra
[Australia Only]. Your user name and password are provided to you
by Telstra BigPond. Enter this information below. Choosing your state
from the drop-down menu
IP address. If your login server address is different than one provided
here, you may manually enter the login server IP address by placing a
check in the box next to "User decide login server manually"
type in the address next to "Login Server"
all of your information, click "Apply Changes"
changes, the Internet Status indicator will read "connection OK" if
your Router is set up properly.
(5)
1. Select your State
Select your state from the drop-down menu
Server" box will automatically be filled in with an IP address.
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address. See "User decide login server manually"
2. User Name
Provided by your ISP. Type in your user name here
3. Password
Type in your password and retype it into the "Retype Password"
(3)
box to confirm it.
(6)
will automatically fill in your login server
(1)
(2)
(3)
34 34
BigPond User
®
(5)
. When you have entered
(7)
. After you apply the
(6)
(4)
(7)
(6)
. The "Login
(4)
(2)
(4)
and
.
.