Facom 711A Manual Del Usuario página 16

STRUCTURE
1. Display
3 3/4-digit LCD, with a max. reading of 3999
2. " Hz %" Button
When the function/range switch is in "Hz/%"
position, pressing this button switches the
meter between frequency and duty cycle
measurements.
3. "RANGE" Button
Used to switch between autorange mode and
manual range mode as well as to select desired
manual range.
4. "S" Button
In current measurement functions, pressing this "S" button switches the meter between
DC current and AC current measurements. When the Function/Range switch is in
" " position, pressing this button switches the meter between diode and
continuity measurements.
5. Function / Range Switch
Used to select the desired function and range as well as to turn on or off the meter.
6. "10A" Terminal
Plug-in connector for the red test lead for current (400mA - 0A) measurements.
7. "µA/mA" Terminal
Plug-in connector for the red test lead for the current measurements < 400mA.
8. "COM" Terminal
Plug-in connector for the black test lead for all measurements.
9. " " Terminal
.
Terminal Plug-in connector for the red test lead for all measurements except current
measurements.
10. " " Button
Button Press this button to turn on/off the backlight.
11. "REL" Button
Used to enter/exit Relative mode.
12. "HOLD" Button
Used to enter/exit Data Hold mode.
READING THE LCD
16