Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for use with a PBX system
To use this telephone connected on a PBX
system, it may be convenient to programme
the access codes for external line. The
telephone will automatically introduce a
pause after the access code. With this, it
will not be necessary to interrupt the dialing
to wait for the ertenal line tone. Up to 2
codes, of one or two digits each, may be
programmed.
Programming 1 access code:
Lift the handset
Press the PROG key
Press the number 0
: Enter the access code (1 or 2 digits)
Press the PROG key
Listen the confirmation tone - long
beep
Hung up
Programming 2 access codes:
Lift the handset
Press the PROG key
Press the number 0
Enter the first access code (1 or 2
:
digits)
Press the REDIAL key
Listen the confirmation tone - long
beep
Enter the second access code (1 or 2
:
digits)
Press the PROG key
Listen the confirmation tone - long
beep
Hung up
Erasing the programmed access codes:
Lift the handset
Press the PROG key
Press the number 0
Press the REDIAL key
Listen the confirmation tone - long
beep
Press the PROG key
Listen the confirmation tone - long
beep
Hung up
Setting the reception volume
This telephone allows adjustment of the
reception volume, which its default is
programmed at normal volume. To select
the
desired
volume,
proceed
following way:
Lift the handset
Press the PROG key
Enter one of the codes below, in
according with the desired option:
• 91 normal volume
:
• 92 high volume
Press the PROG key
Listen the confirmation tone - long
beep
Hung up
Password
The key lock function is protected by a 4
digit password. The default password is
1234, and it can be modified.
Changing the password:
Lift the handset
Press the PROG key
Press the key
6
in
the
Publicidad
