Troubleshooting - JVC KD-R980BTS Manual De Instrucciones

REFERENCES
Source name Display information
IPOD-USB or When [HEAD MODE]/[AUTO MODE] is selected ( 8):
ANDROID Song title (Artist) Song title (Album name)
1
title (Date/Clock)*
Song title (Artist) with music synchronisation*
(back to the beginning)
PANDORA Station name (Date/Clock)*
1
Clock)* Song title (Artist)
name) Song title (Date/Clock)*
1
(Date/Clock)* Station name (Date/Clock)*
music synchronisation*
IHEARTRADIO Station name (Date/Clock)*
Song title (Date/Clock)*
1
Clock)* with music synchronisation*
beginning)
SIRIUS XM Channel number (Status)
Artist (Status) Song title (Status)
information (Status)
Date (Status) Channel number (Status) with music
2
synchronisation* (back to the beginning)
1
AUX AUX (Date/Clock)*
2
synchronisation* (back to the beginning)
BT AUDIO Song title (Artist) Song title (Album name)
1
title (Date/Clock)*
Song title (Artist) with music synchronisation*
(back to the beginning)
* 1
Battery and signal strength of the Bluetooth device will be shown if
[BATT/SIGNAL] is set to [AUTO]. ( 16)
* 2
For KD-R980BTS: The color of the illumination changes and
synchronises with the music.
For KD-R880BT: The brightness of the button illumination changes
and synchronises with the music.

TROUBLESHOOTING

Symptom
Song
1
Playing time (Date/Clock)*
2
1
Shared/Radio (Date/
Song title (Album
1
Playing time
1
with
2
(back to the beginning)
1
Song title (Artist)
1
Station name (Date/
2
(back to the
Channel name (Status)
Content
Category name (Status)
1
AUX (Date/Clock)* with music
Song
1
Playing time (Date/Clock)*
2
Sound cannot be heard.
"MISWIRING CHECK WIRING THEN PWR
ON" appears.
"PROTECTING SEND SERVICE" appears.
Source cannot be selected.
• Radio reception is poor.
• Static noise while listening to the
radio.
Disc cannot be ejected.
"IN DISC" appears.
"PLEASE EJECT" appears.
Playback order is not as intended.
Elapsed playing time is not correct.
"NOT SUPPORT" appears and track skips.
"READING" keeps flashing.
"CANNOT PLAY" flashes and/or
connected device cannot be detected.
The iPod/iPhone does not turn on or
does not work.
"LOADING" appears when you enter
search mode by pressing .
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of the
speaker wires are insulated properly. Turn the power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. ( 4)
Connect the antenna firmly.
Press and hold to forcibly eject the disc. Be careful not to drop
the disc when it is ejected.
Make sure nothing is blocking the loading slot when you eject
the disc.
Press , then insert the disc correctly.
The playback order is determined by the file name (USB) or the
order in which files were recorded (disc).
This depends on the recording process earlier.
Check whether the track is a playable format. ( 27)
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
• Check whether the connected device is compatible with this unit
and ensure the files are in supported formats. ( 27)
• Reattach the device.
• Check the connection between this unit and iPod/iPhone.
• Detach and reset the iPod/iPhone using hard reset.
This unit is still preparing the iPod/iPhone music list. It may take
some time to load, try again later.
29
ENGLISH