seT-uP
• To change the temperature and/or timer setting while the Sedona is running, press the
START/PAUSE button, then press the SET button and change the temperature and/or
time. Then press START/PAUSE button to re-start the Sedona.
NOTE: The Sedona has an energy efficient mode for smaller batches of up to 4 trays of dehydrated
foods.
(1) Insert the solid tray in the middle slot to divide the Sedona into two compartments each contain-
ing 4 trays. Since the Sedona is equipped with two independent fans with heating coils, the Sedona
can be used to dehydrate foods in the upper or lower half of the unit when divided.
(2) Press the TRAY button to select which fan with heating coil will be active.
(3) Load the trays into the chosen half of Sedona according to which fan with heating coil is selected.
More Tips:
• If you choose one half, power supply to both the heating coil and fan of the other half will
be shut off.
• If you choose upper half, you may dehydrate up to 5 trays including the solid tray (the
divider). The upper LED will indicate the use of the upper-half of the chamber.
• Using the upper half of the machine is recommended if you wish to operate one half of
the machine because heat naturally rises.
• If you choose lower half, you may dehydrate up to 4 trays. The lower LED will indicate the
use of just the bottom half of the chamber.
• If you see both LEDs are on, it means that you chose both upper and lower halves (the
whole system).
CLeanIng anD MaInTenanCe
1. Clean the trays and tray sheets with mild detergent under warm water after each use. The trays
are NOT dishwasher safe.
2. To clean the Main Body, first unplug the machine and then wipe the surface using a wet towel.
Do not rinse the Sedona with water or submerge the machine in water.
3. Make sure the trays and tray sheets are thoroughly dried before inserting them back into the
machine. Keep your machine and machine parts in a safe place out of the reach of children.
12