Troubleshooting - Tribest Sedona SD-P9000 Manual De Instrucciones

Symptom
Machine does not turn on • The plug is incorrectly inserted
Display lights are not on
Fan is working but there
is no heat
Heater is working but the
fan is not working
Not dehydrating
Water drops on the door
Over heating or little
heating
Uneven dehydration
Abnormal sound from
the fan
Probable Cause
into the electrical outlet.
• The machine switch is not on.
• The heating system is out-of-
order.
• The fan is out of order.
• Foreign material is stuck on
the fan.
• Too much food on the tray.
• Food is overlapped on the tray.
• Fan is slow.
• Too much food on the tray.
• Food contains too much water.
• Temperature control system is
not working properly.
• The thickness of food is not
even.
• Too much food on the tray
• The fan is out-of-order

TROuBLesHOOTIng

Remedy
• Remove and plug in again.
• Turn the switch ON.
• Turn the switch ON.
• Turn the machine OFF and
contact the nearest service
center.
• Turn ther machine OFF and
contact the nearest service
center.
• Remove the foreign material.
• Reduce the food quantity.
• Evenly spread food on the
tray in a single layer.
• Turn the machine OFF and
contact the nearest service
center.
• Reduce the food quantity.
• Reduce the food quantity
and increase the dehydration
time.
• Turn the machine OFF and
contact the nearest service
center.
• Evenly slice the food.
• Reduce the food on the tray.
• Choose the correct tray.
• Turn the machine OFF and
contact the nearest service
center.
EN
ES
13