Changing The Dust Bag; Cleaning The Motor Protection Filter; Removing The Exhaust Filter; Cleaning The Exhaust Filter - Bosch BGL6 Manual De Usuario

en Cleaning and servicing

Changing the dust bag

If the inspection window of the filter
change indicator lights up continu-
ously when the nozzle is raised and
at the highest power level, change
the dust bag.
Requirement: The lid is open.
→ "Opening the lid", Page 33
To close the dust bag, pull the
1.
locking tab.
→ Fig.
22
Remove the full dust bag from the
2.
holder.
Dispose of the full dust bag.
3.
Push the new dust bag into the
4.
holder until it clicks into place.
Do not kink the dust bag.
‒
→ Fig.
23
→ "Closing the lid", Page 33
5.
Cleaning the motor protection
filter
Tip: To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter regularly. After
vacuuming fine dust particles, clean
or replace the motor protection filter
in order to guarantee the appliance's
suction.
Requirement: The dust bag has
been removed.
→ "Changing the dust bag",
Page 34
In order to release the motor pro-
1.
tection filter from the catch mech-
anism, pull on the side tabs.
→ Fig.
24
Remove the motor protection filter
2.
in the direction of the arrow.
Tap out the motor protection filter.
3.
1
Depending on the appliance specifications
34
If the motor protection filter is very
4.
dirty, rinse it.
→ Fig.
25
Leave the filter to dry for at least
5.
24 hours.
Refit the motor protection filter into
6.
the appliance and lock it in place
at the top.
Insert the dust bag.
7.
→ "Changing the dust bag",
Page 34
→ "Closing the lid", Page 33
8.

Removing the exhaust filter

Requirement: The lid is open.
→ "Opening the lid", Page 33
Push the locking tab in the direc-
1.
tion of the arrow and release the
exhaust filter.
Remove the exhaust filter from the
2.
appliance.
→ Fig.
26

Cleaning the exhaust filter

For optimum performance, clean or
replace the exhaust filter once a year.
Tip: After vacuuming fine dust
particles, clean or replace the ex-
haust filter in order to guarantee the
appliance's suction.
Note: The filtering effect of the ex-
haust filter is retained, even if the fil-
ter surface becomes discoloured.
Cleaning the filter fleece
The filter fleece, with the filter grid, is
attached to the exhaust grille.
Requirement: The exhaust filter has
been removed.
→ "Removing the exhaust filter",
Page 34
1
1