The Adaptor; Heal Pad - ROHO The ADAPTOR Manual Del Usuario

THE ADAPTOR

Intended Use: THE ADAPTOR
cellular-design, neoprene surface intended for cushioning and
shock absorption needs and reduction of friction on surfaces such
as a wheelchair side, headrest or footrest to provide skin/soft tissue
protection. There is no weight limit. The ADAPTOR is not intended to
be used as a supporting medium under the buttocks.
Instructions: Use scissors to trim THE ADAPTOR to fit where needed (sides of wheelchairs,
trays, head rests, foot rests). Cut between the sealed air cells when possible. To attach
the product to the surface, use hook and loop fastener strips.
Air cells that have been cut WILL NOT provide cushioning.

HEAL PAD

Intended Use: The ROHO
Cushion (HEAL PAD) is an adjustable,
air-filled, cellular-design, neoprene
surface and is intended to conform to
an individual's heel to provide skin/soft
tissue protection and provide an environment to facilitate wound healing. There is no
weight limit.
Inflation Instructions:
1. Place the HEAL PAD flat, with the cells facing up.
2. Slide the rubber nozzle of the hand pump over the inflation valve. Pinch the nozzle and
open the inflation valve.
3. Inflate the HEAL PAD, and then close the inflation valve completely. Remove the hand
pump.
Attachment Instructions:
1. Fasten the snaps.
CHECK INFLATION! After adjustment, confirm that there is NO CONTACT between the
individual's heel and the base of the HEAL PAD. If there is contact, add air.
ROHO Special Application Cushioning Devices Operation Manual
®
PAD (THE ADAPTOR) is an air-filled,
® ®
HEAL PAD
2. Place the
individual's heel
on the cells.
3. Place the foam tab
over the shin, insert
the strap through
the metal ring, and
adjust the strap.
4
Foam Tab
Strap