Shower/Commode Cushion; Toilet Seat Cushion - ROHO The ADAPTOR Manual Del Usuario

MINI-MAX Cushion and PACK-IT Cushion, Continued
Cover Removal: Unzip the cover and remove the cushion.
MINI-MAX Cover Replacement: Insert the cushion into the cover. Pull the inflation valve
and Yellow Rope through a corner opening.
PACK-IT Cover Replacement: Insert the PACK-IT into the cover. Close the zipper.
Shower/Commode Seat Cushion and Toilet Seat Cushion
Intended Use: The ROHO
(Shower/Commode Cushion) is an adjustable, air-
filled, cellular-design, support surface that utilizes
®
DRY FLOATATION technology and is intended for
short-term cushioning needs on bedside commodes
and shower chairs to provide skin/soft tissue
protection. There is no weight limit.
Intended Use: The ROHO
Seat Cushion) is an adjustable, air-filled, cellular-design,
neoprene surface intended for short-term cushioning
needs on toilets and portable bedside commodes. There is
no weight limit.
Instructions for Shower/Commode Cushion and Toilet Seat Cushion:
1. Slide the rubber nozzle of the hand pump over the inflation valve(s). Pinch the nozzle
and open the inflation valve(s). Inflate the cushion, and then close the
inflation valve(s) completely. Remove the hand pump.
2. Place the cushion on the surface, making sure the air cells face the
individual. Confirm that the individual is in their usual position. Confirm
correct placement of the cushioning device.
3. Adjust the inflation level as required. Close the inflation valve(s) when
adjustment is complete.
Toilet Seat Cushion Attachment: Use the straps and snaps to secure the
cushion to the surface.
Contact between the skin and areas where the toilet seat is NOT covered by the
Toilet Seat Cushion could result in tissue damage.
CHECK INFLATION! After adjustment, confirm that there is NO CONTACT between
the individual and the base of the cushion. If there is contact, add air.
ROHO Special Application Cushioning Devices Operation Manual
®

Shower/Commode Cushion

® Toilet Seat Cushion (Toilet
6
Open
Close