Lumbar Cushion; Mini-Max; Pack-It - ROHO The ADAPTOR Manual Del Usuario

ROHO Special Application Cushioning Devices Operation Manual

Lumbar Cushion

Intended Use: The ROHO
Cushion) is an adjustable, air-filled, cellular-design,
neoprene surface that utilizes DRY FLOATATION
and is intended to conform to an individual's lumbar region.
There is no weight limit.
Instructions:
1. Slide the rubber nozzle of the hand pump over the inflation valve. Pinch the nozzle
and open the inflation valve. Inflate the cushion, and then close the inflation valve
completely. Remove the hand pump.
2. Place the cushion on the surface, making sure the air cells face the individual.
Confirm that the individual is in their usual position. Confirm correct placement of the
cushioning device.
3. Adjust the inflation level as required. Close the inflation valve when adjustment is
complete.
CHECK INFLATION! After adjustment, confirm that there is NO CONTACT between the
individual and the base of the cushioning device. If there is contact, add air.
MINI-MAX Cushion and PACK-IT Cushion
Intended Use: The ROHO
is an adjustable, air-filled, cellular-design, neoprene
surface intended as a supplemental seating surface. There
is no weight limit, yet the cushion must be properly sized
to the individual.
Intended Use: The ROHO
an adjustable, air-filled, cellular-design, neoprene surface
intended for short-term cushioning needs. There is no
weight limit, yet the cushion must be properly sized to the
individual.
Atmospheric Adjustment Instructions for MINI-MAX and PACK-IT:
1. Slide the rubber nozzle of the hand pump over the inflation valve. Pinch
the nozzle and open the inflation valve. Inflate until the cushion arches
slightly.
2. Remove the hand pump. Do not close the inflation valve. Allow air to
escape from the inflation valve.
3. Listen (or place your hand in front of the inflation valve) to confirm that
deflation has stopped.
4. Turn the inflation valve clockwise to close.
5. Place the cushion on the surface, making sure the air cells face the individual.
CHECK INFLATION! After atmospheric adjustment, confirm that there is NO CONTACT
between the individual and the base of the cushioning device. If there is contact, add air.
When possible, use the hook or loop fasteners to further secure the product to the
surface.
®
Lumbar Support Cushion (Lumbar
® ®

MINI-MAX

Cushion (MINI-MAX)
®

PACK-IT

® Cushion (PACK-IT) is
® technology
5
Open
Close