Intended Use - Bosch AdvancedTableCut 52 Manual Original

22 | English
vents the power tool from storage damage, and from be-
ing operated by untrained persons.
Never use the power tool if the cable is damaged. Do
u
not touch the damaged cable and pull out the mains
plug if the cable is damaged while working. Damaged
cables increase the risk of an electric shock.
Check the cable regularly and have a damaged cable
u
repaired only by an authorised customer service
agent for Bosch power tools. Replace damaged exten-
sion cables. This will ensure that the safety of the power
tool is maintained.
Do not use the power tool for cutting slots (stopped
u
grooves).
Never reach behind the saw blade to hold onto the
u
workpiece, remove wood chips or for any other
reason. The clearance between your hand and the rotat-
ing saw blade is too small when you do this.
Operating as a saw: Guide the saw blade against the
u
workpiece only when the saw is switched on. Other-
wise there is a risk of kickback occurring if the saw blade
catches in the workpiece.
Operation as a table saw: Only advance the workpiece
u
towards the saw blade when it is running. Otherwise
there is a risk of kickback occurring if the saw blade
catches in the workpiece.
Operate the power tool only when the work area up to
u
the workpiece is clear of any adjusting tools, wood
chips, etc. Small pieces of wood or other objects that
come in contact with the rotating saw blade can strike the
operator with high speed.
Only saw one workpiece at a time. Workpieces placed
u
on top of or alongside each other can cause the saw blade
to jam or the workpieces to move out of place and against
each other when sawing.
Always use the universal guide. This improves the cut-
u
ting accuracy and reduces the possibility of the saw blade
jamming.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of the symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
1 609 92A 3LB | (08.01.2019)
Symbol Meaning
Keep hands away from the
cutting area while the power
tool is running. Contact with
the saw blade can lead to injur-
ies.
Wear a dust mask.
Wear safety goggles.
Wear ear protection. Exposure
to noise can cause hearing loss.
Saw blade technology com-
prises a saw blade with a re-
volving micro-chain
Possible rotational directions of
the rotary knob to adjust the
bevel angle
Make sure the saw blade is fit-
ted the right way round. The
rounded side of the saw blade
must be facing away from the
user.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain.
Bevel angles up to a maximum of 0° to +45° and mitre angles
of 60° (left-hand side) to 60° (right-hand side) on the univer-
Bosch Power Tools