Wall Mounting - Rockwell Automation Allen Bradley InView Serie Manual De Instalación

6 InView Marquee Message Display
Remove
these
screws.
Publication 2706-IN006E-EN-P
Hazardous voltage. Contact with high voltage may
WARNING
cause death or serious injury. Always disconnect
power to sign prior to servicing.
!

Wall Mounting

Remove only one end cap at a time.
TIP
1. Remove the 4 screws and the end cap from one end of the sign.
2. Slide one of the wall mounting brackets onto the back of the
sign until it is approximately 0.5 in. away from the end of the
sign.
Wall mounting
bracket
127 (5.00)
33.13 (1.305)
0.5"
33.13 (1.30)
25.40 (1.00)
12.70 (0.50)
7.62 (0.30)
17.65 (0.70)
30.35 (1.195)
2.65 (0.105)
75.95 (2.99)
40.64 (1.60)
30.35 (1.195)
4.04 (0.159) 10- 32 UNC-2B 2 Holes
7.11 (0.280) Thru 3 Holes
Wall
mounting
bracket