Usb Operations - JVC KD-A805 Manual De Instrucciones

USB operations

This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit).
You can use these two terminals at the same time.
• You can also connect a USB Bluetooth Adapter (KS-UBT1) and/or an Apple iPod/iPhone to the USB input
terminal(s). For details of the operations, see pages 13 – 18 and 24 – 26.
This unit can play MP3/WMA/WAV tracks stored in a USB mass storage class device (such as a USB
memory, Digital Audio Player, portable HDD, etc.).
1
2
and/or
If a USB device has been attached...
Playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stop playing and detaching the USB device
Straightly pull it out from the USB input terminal.
• "No USB" appears. Press SRC to listen to another
playback source.
12
USB memory
USB cable from the rear of
the unit
Turn on the power.
Connect a USB device.
All tracks will be played repeatedly until you
change the source or disconnect a device.
You can operate the USB device in the same way you
operate the files on a disc. (See page 11.)
• You can listen to WAV files by following the MP3/
WMA file operations listed on page 11.