Listening To The Ipod/Iphone; When Connected With The Usb Input Terminal; Selecting A Track From The Menu - JVC KD-A805 Manual De Instrucciones

Listening to the iPod/iPhone

You can connect the iPod/iPhone using the following cable or adapter:
Cable/adapter
USB 2.0 cable (accessory of the iPod/iPhone) to the USB input terminal
on the control panel or USB cable from the rear of the unit
Interface adapter for iPod, KS-PD100 (not supplied) to the CD
changer jack on the rear of the unit
• When iPod/iPhone devices are connected to both front and rear USB input terminals, the unit only detects and
charges the first connected device.
• Disconnecting the iPod/iPhone will stop playback. Press SRC to listen to another playback source.
• For details, refer also to the manual supplied with your iPod/iPhone.
Caution:
• Avoid using the iPod/iPhone if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
When connected with the USB
input terminal
There are two control terminals in "iPod FRONT/
iPod REAR" source.
• <Headunit Mode> : Control by this unit.
• <iPod Mode> : Control by the connected iPod/
iPhone.
Preparation: Select the controlling terminal,
<Headunit Mode> or <iPod Mode> for iPod
playback:
• Press and hold BACK button.
• Make the selection from <iPod Switch> setting, see
page 33.
The operations explained below are under
<Headunit Mode>.
1 Select "iPod FRONT"
or "iPod REAR."
Playback starts automatically.
2 Select a song.
24
To operate
See "When connected with the USB input
terminal" below.
See "When connected with the interface
adapter" on page 25.

Selecting a track from the menu

1
Enter the main menu.
2
Select the desired menu.
[Turn]
Ô
Playlists Artists
Ô Ô
Podcasts
Ô
Audiobooks
3
Select the desired item.
[Turn]
• Repeat this procedure until the desired track is
selected.
• To return to the previous menu, press BACK.
=
[Press]
Ô Ô
Albums Songs
Ô
Genres Composers
=
[Press]