Battery State Of Charge; Battery Preparation; Battery Tube Install Location; Connections - SOMFY Solar Pack Instrucciones De Instalación

3.3 Battery State of Charge

The Battery is shipped from the factory inside the battery tube with a
partial charge only.

3.3.1 Battery Preparation

Have a service professional fully charge the battery using the
compatible Somfy Solar Pack Rapid Charger (REF#9017248 - Solar
Pack Charger).
Important! Refer to Solar Pack Wall Charger Instructions.
Caution! Use of another battery charger is a safety hazard, is
prohibited and voids the Somfy Warranty. Disconnect from AC
wall receptacle upon completion of charge.
Battery must be fully charged prior to installation. Do not
exceed 5 days from time of 100% charge to installation or
performance may not be met.
If the latest charging date of the battery exceeds 6 months,
please don't install the battery and your installer for a new
battery.

3.4 Battery Tube Install Location

Once conditioned with a pre-charge, the battery tube assembly can
be secured and hidden from view either behind, inside or next to the
window covering product hardware.
The battery tube is compatible with Somfy Mounting Clips designed
for Shangri-La (REF# 9013266) & Silhouette (REF#9013264) window
covering products.
For outside of head rail mounting, optional battery tube wall mounting
clips are available (REF#9013263) for either vertical or horizontal
positioning.
For blinds with box head rails, room may exist to place the battery
inside the rail without interference.
Caution! If installing the battery vertically, always position it
with the cable output upwards to reduce unrestrained wire from
catching the shade.

4. Connections

Caution! The wiring harness connecting the Solar Pack
components must be protected from the movement of the
motorized window covering.
Caution! Do not change the configuration of this system to
include different connectors.
1) Connect the wire harness to the motor.
2) Connect the solar panel to the wire harness
3) Connect the battery tube to the wire harness

5. Commissioning

5.1 Activation of Motor

If the Solar Pack is being installed as an upgrade to an existing Somfy
WireFree™ motorized shade installation, there is no need to reprogram
the motor.
If the Solar Pack is being installed with a new Somfy WireFree™ motor,
follow the motor installation guide.
Solar Pack Charger (REF#
9017248
-sold separately.
SOLAR PACK BATTERY TUBE MOUNTING CLIPS (OPTIONAL)
WALL MOUNT CLIPS Shangri La Mount Clips
REF# 9013266
REF#9013263
Headrail Mounting
Horizontal or Vertical Wall
Mounting
Vertical Battery Tube connector orientation
Motor Connector
Standard Installation Plan of Roll-Up Shade.
)
Silhouette Mounting
Clips REF# 9013264
Headrail Mounting
Solar Panel +
Battery Tube
Connectors