miniland baby digimonitor 7" Manual De Instrucciones página 19

MONITOR OPERATION
Power ON/OFF (15):
Use this button to turn ON/OFF the unit.
Choose LCD Display Screen Size (16):
Use this button to choose display screen size between 16:9 or 4:3
Volume Control:
Use the Adjustment Control ( + & - ) button ( 17) directly to increase or decrease the speaker
volume.
Talk (21)
To talk to the baby, press & hold the Talk button (21) to talk. The talking volume is adjusted
by Adjustment button (13) on baby unit. After talk, release the Talk button & listen to the baby
sound again. Please note that by pressing Talk button, you can remove all icon symbols
display on screen.
Music (19)
Press the Music button (19) once to play the first lullaby broadcast
Press Music button again to change to second lullaby
lullaby 3. Press again to stop lullaby. There are three incorporated lullabies for selection.
The LCD will show from
is adjusted by button (13) on the baby unit. The chosen lullaby will play back non-stop until
you stop it.
You can stop the music immediately during the playback by pressing Music button (19)
for 3 seconds.
MODE button (18) & Adjustment button (+ & -) (17)
Brightness, Contrast, Sharpness, Colour, Volume, Channel Selection and Scan can be
adjusted by these two buttons.
Press MENU button (18) once, Brightness appears first and it can be adjusted with the
Adjustment button (17) (+/-) The same can be done for Contrast, Sharpness, Colour, Volume
and Channel Selection and Scan.
Channel Scan (Code button 25)
This product enables you to use up to 4 different cameras with the same Monitor
continuously monitoring different areas.
Press Menu button (18) for 6 times until CHI CH2 CH3 CH4 SCAN is appeared on screen.
Then use Adjustment button ( + & -) (17) to choose SCAN and then press Menu button (18)
once. Scan function starts working automatically. The monitor will stay for 5 seconds with
one camera before switching to the next one automatically.
To stop Scan function, press MENU button (18) for 6 times again to get CHI CH2 CH3 CH4
SCAN on screen. And to return to a specific channel choose the desired channel number by
pressing Adjustment button ( + & -) (17) .
During Scan functioning, PTT (push to talk) function cannot be used.
1 to 3 to indicate your selection. The music volume
1on the Baby unit.
2. Press again to change to third