Starting Procedure - Maruyama BL55 Manual Del Propietário

OPERATING INSTRUCTIONS

STARTING PROCEDURE

STEP #1)
Pump the "PRIMER BULB" under of the
carburetor until fuel can be seen flowing
through the "FUEL-RETURN LINE".
PRIMER
BULB
FUEL
RETURN LINE
HA Type
STEP #3)
Turn the stop switch ON. (Confirm that the
stop switch is at the starting position.)
Set the throttle lever at 1/2 speed.
1/2 SPEED
START
CAUTION!
Press down the "AIR FILTER COVER" and Pull the
"STARTER GRIP" briskly to start the engine.
NOTE: Only short pulls are necessary. Never pull the
starter cord to its fullest extension. Never let go of the
English
STEP #2)
Move the "CHOKE LEVER" fully up ward to
the closed position. If the engine is already
warm, only a partial or open (no choke) choke
setting may be required.
CHOKE
LEVER
Standard
STEP #3)
Set the throttle lever at 1/2 speed.
STOP
— 11 —
CLOSE
OPEN
HIGH SPEED
IDLE SPEED
STOP
STARTER GRIP