Cleaning And Care; Maintenance/Changing The Filter - Silvercrest SDM 1500 C2 Instrucciones De Uso

Cleaning and care

RISK OF ELECTRIC SHOCK!
► Always remove the mains power plug before cleaning the appliance!
WARNING – RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Risk of burns!
CAUTION – PROPERTY DAMAGE
► When cleaning the surfaces use neither abrasive or chemical cleaners,
nor sharp or scratchy objects.
■ Empty the water tank
■ After each use, remove the pad
■ Note the following washing instructions when you wash the pad
washing machine:
■ If necessary, wipe the appliance with a damp cloth. For stubborn soiling use
a mild detergent on the cloth.
Maintenance/changing the filter
After 4–6 months or approximately 100 cleaning cycles (one cycle corresponds
to one water tank filling), you will need to change the filter
our Service Department for replacement filters.
RISK OF ELECTRIC SHOCK!
► Before changing the filter
1) To remove the filter
2) Pull the filter
3) Insert the new filter
4) Replace the water tank
│ GB │ MT
■ 48
after every use.
from the steam foot
Wash at max. 60°C
, always pull out the mains plug!
, first remove the water tank
upwards out of the appliance.
.
.
and wash it out.
Do not tumble dry
Do not iron
. Please contact
from the appliance.
SDM 1500 C2
in the