Hitachi Koki UC 18YMRL Instrucciones De Manejo página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
English
SPECIFICATION
CHARGER
Model
Power source
Charging time
Charging voltage
Weight
AC/DC Dual Power Charger included:
Charge battery from AC mains socket or 12V DC car cigarette lighter socket.
APPLICATION
For charging the HITACHI BATTERY
○ EB712S, EB7S, EB714S, FEB7S, EB7B, BCC912,
EB912S, EB9S, EB914S, EB914, FEB9S, EB9B,
EB924,
EB926H,
EB930H,
EB1212S,
EB12S,
EB12B, EB1220BL, EB1224, BCH1215, BCH1220,
EB1226HL,
EB1230H,
EB1233X, BCC1412, EB1412S, EB1414S, EB1414,
EB14B, EB1424, BCH1415, BCH1420, EB1426H,
EB1430H, EB1430X, EB1433X, BCL1415, BCL1430,
EBL1430, EB1812S, BCC1812, EB1814SL, EB18B,
EB1820, EB1820L, EB1824L, BCH1815, BCH1820,
EB1826HL,
EB1830H,
EB1833X, BCL1815, EBM1830
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect to the power source
When charging the battery from an AC power source
○ Connect
the
charger's
receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red (At 1-second
intervals).
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
When charging the battery from a DC 12V in-car power
source
○ Secure the battery charger in place in the car.
Use the strap supplied with the battery charger to
fasten the battery charger in place and prevent it from
moving inadvertently. (See Fig. 2)
CAUTION
Do not place the battery charger or battery under
the driver's seat. Secure the battery charger in
place to prevent it from moving inadvertently as
this may lead to an accident.
10
Approx. 22 – 60 minutes
EB933X,
BCC1212,
EB1214S,
EB1214L,
FEB12S,
EB1230HL,
EB1230X,
EB1830HL,
EB1830X,
power
cord
to
Fig. 2
UC18YMRL
AC
7.2 – 18 V
0.7 kg
○ Insert the cigarette lighter connecting plug into the
cigarette lighter socket.
If the plug is loose and falls out of the cigarette lighter
socket, repair the socket. As the socket may be faulty,
you are recommended to contact your local car dealer.
Continued use of the socket may result in an accident
due to overheating.
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities
as shown in Fig. 1.
CAUTION
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as a
deformed recharging terminal.
3. Charging
When inserting a battery in the charger, the pilot lamp
will light up continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red (At 1-second intervals). (See
Table 1)
the
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
DC12 V (in-Car)
Approx. 50 – 130 minutes

Publicidad

Tabla de contenido
loading

Tabla de contenido