SOLAC AS3244 Instrucciones De Uso página 9

ENGLISH
Never vacuum hot or sharp objects (cigarette
•
butts, ash, nails, etc.).
Use the appliance only for dry working tasks.
•
SERVICE:
Misuse or failure to follow the instructions may
•
be dangerous and renders the manufacturer's
guarantee null and void.
DESCRIPTION
A Vacuum cleaner base
•
B Extendible tube
•
C Hose set
•
D Manual air regulator
•
E Hose head
•
F Automatic cord rewind
•
G On/off switch
•
H Transportation handle
•
I Deposit
•
J Power regulator
•
K Opening button for deposit
•
L Wheels
•
M Plug housing
•
N Vacuum cleaner base for parquet
•
O Lance + Multi-use brush
•
P Grill outlet filter
•
Q Outlet filter
•
R Motor filter
•
If the model of your appliance does not have
•
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all the product's packaging has
•
been removed.
VACUUMING FUNCTION:
Fit the hose unit to the vacuum cleaner's air
•
intake.
To take off the vacuum hose, turn the hose to
•
the left and pull outwards. (Fig.1).
INSERTION OF ACCESSORIES INTO THE
APPLIANCE'S GRIP:
The appliance's grip is designed in such a
•
way that it allows the insertion of the following
accessories: (use the combination that best
meets your requirements).
- Extendible extension tube: Designed to
provide access to surfaces which are out of
reach and make floor cleaning comfortable,
its length can be adjusted by using the ad-
justment control.
- Vacuum cleaner base: Specially designed
for cleaning floors (both rugs, carpets and
hard floors), its base has a retractable
brush that can be adjusted to two heights
for greater efficiency on these floors. It is
advisable to have the brush out for hard
floors and the brush in for rugs and carpets.
- Vacuum cleaner base for delicate floors:
Specially designed for delicate floors, such
as parquet wooden flooring.
- Lance: Specially designed for getting into
cracks and difficult corners.
- Upholstery brush: Especially suitable for
cleaning textile surfaces.
USE:
Take the length of cable required out of the
•
housing.
Connect the appliance to the mains.
•
Turn the appliance on using the on/off switch.
•
ELECTRONIC POWER CONTROL:
The power of the appliance can be regulated
•
by using the power regulator control (J). This
function is very useful, as it makes it possible
to adapt the power of the appliance to the type
of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE AP-
PLIANCE:
Turn the appliance off, using the on/off switch.
•
Unplug the appliance to the mains.
•
The cable housing allows the cable to be
•
stored as well as to extract the length of cable
necessary to operate the device, avoiding the
risk of accidents.
Retract the cable by pressing the roller cable
•
button and guide the cable into the appliance.
Retract the cable by giving it a gentle tug and
•
then allowing the cable roller device to auto-
matically spool the cable in.
Clean the appliance
•
CARRY HANDLE/S:
The device has a handle on the upper part so
•
it can be transported easily and comfortably
(Fig.2).
PARKING POSITION:
This appliance has one parking position for
•
comfortable and straightforward storage.
To use the horizontal parking position, fix the
•
break pad hook to the hook situated on the
rear side of the appliance (Fig.3).
EN