Miller Edge FALL PROTECTION SYSTEM Manual De Operación Y Mantenimiento página 4

II. INSTALLATION
Before installation, it is recommended that the support structure meets or exceeds requirements specified
in General Requirements, Part B Limitations.
Before installation of this equipment, User must read and understand all instructions and carefull
inspect all equipment to ensure that it is in usable condition. User should familiarize his/herself
with all components of this
s ection for further details.
WARNING: Do not use if any damaged or missing parts are detected.
A. PART IDENTIFICATION:
*
Optional Equipment
*
9081WT/300LB
Counter Weights
Front of Unit
Brake Jack
Pushing
Handle
Swiveling Casters
system. Also, check for missing or damaged parts. Refer to inspection
Fig. 1
Push Pin
Vertical Boom
Lifting Rings
Brake Jack
Push Pin
*
9081MRMB
Main Body
Brake Jack
y
Anchor
Points
Horizontal Boom
Hitch Pin
Steering handles
Hitch Pin
Stabilizer
Swiveling Casters