Corghi A 2030 Manual De Uso página 107

If the wheel weighs more than 10 kg, with a lifting frequency of more than 20 wheels/
hour, it is recommended to use a lifting device (optional).
- Pull the unlocking button
(fig.18a) to position
the operating arms in the
"non-working" position (tool
at the top and the horizontal
arm completely retracted)
(A fig. 18c).
- Press button (fig. 18b) to lock the arms into
the "non-working" position.
- Press pedal
into the "non-working" position (B Fig. 18c).
- If necessary, set the diameter range using the
adjustment device located below the turntable,
(1-2-3 fig. 19) by proceeding as follows:
• Press pedal
c o m p l e t e l y
configuration (fig. 18e).
In this configuration, the
jaws are completely open.
• W i t h t h e m a c h i n e
completely stopped,
remove the locking pin
using the knob (A Fig.19),
making sure not to press
any control.
• Turn the adjustment device using the knob until securing it into the new position
(A Fig. 19).
• Check that the locking pin is firmly secured in its housing.
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
CAUTION
(fig. 18d) to take the column
and bring it into
l i f t e d
18a
18d
18b
18c
18e
EN
107