Troubleshooting - Corghi A 2030 Manual De Uso

RISK OF EXPLOSION. Do not mount a tyre and a rim that do not have the same diameter
(e.g., 16 and 1/2 inch tyre and a 16 inch rim).
If the tyre is excessively inflated, the air can be released
by pressing the brass manual deflation button located
below the air pressure gauge (2 - Fig.40)
- Disconnect inflation hose from valve rod.
- Press the pedal
"non-working position".
- Remove the wheel from the tyre changer.

9. TROUBLESHOOTING

The information below and the booklet "spare parts" do not authorise the user to op-
erate on the machine in case of malfunction. They provide the technical support centre
with accurate information so as to reduce intervention times. Any intervention on the
machine or on the system must be performed by qualified and authorised personnel.
Turntable does not turn
Lack of power supply.
➥ Check mains voltage presence.
➥ Check the state of fuses.
➥ Check the state of the differential and/or magneto-thermal circuit breaker.
➥ Check cable connections in the plug.
The motor is not running:
➥ Check the microswitches of the pedal unit (only for motor inverter)
➥ Check the motor rotation control of the pedal unit
➥ Replace the inverter board (only for motor inverter).
➥Replace the motor.
Belt broken.
➥ Replace the belt.
Reduction gear clamped:
➥ Replace the reduction gear
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
120
CAUTION
to move the column into the
CAUTION
1
2
40