Function Check Of Clipping Machine Favorita Hybrid/Fav5 Hybrid; Handling Shearing Head Favorita Hybrid; Adjusting The Plate Pressure; Removing The Shearing Head - B.Braun Aesculap Favorita Hybrid GT200 Instrucciones De Manejo

Aesculap Suhl GmbH
Clipping machine Favorita Hybrid/FAV5 Hybrid
4.2 Function check of clipping machine
Favorita Hybrid/FAV5 Hybrid
Carry out a visual inspection.
Check the switch position.
Mount the shearing head correctly and lubricate it
if necessary, see Chapter Handling shearing head
Favorita Hybrid and see Chapter Handling shearing
head FAV5 Hybrid
Clean clipping machine Favorita Hybrid/FAV5
Hybrid before use, see Chapter Cleaning/disinfec-
tion.
4.3 Handling shearing head Favorita
Hybrid

4.3.1 Adjusting the plate pressure

Note
The plate pressure can be adjusted to increase the cut-
ting power as required.
Tighten knurled screw 8 so that upper cutting
plate 12 can be moved by hand, by applying mod-
erate, lateral pressure.

4.3.2 Removing the shearing head

Risk of injury caused by sharp cut-
ting plates!
Handle the shearing head of
clipping
WARNING
Hybrid with appropriate caution.
Loosen knurled screw 8 with leaf spring 9.
Push upper cutting plate 11 under pressure piece 7
out of the shearing head.
This completes the disassembly of the shearing
head.
6
4.4 Handling shearing head FAV5

4.4.1 Changing the shearing head

machine Favorita
Fig. 3
Hybrid
Risk of injury caused by sharp cut-
ting plates!
Handle the shearing head of
WARNING clipping machine FAV5 Hybrid
with appropriate caution.
15
Press ON/OFF switch 5 to switch off clipping
machine FAV5 Hybrid.
Press shearing head lock 15, see Fig. 3.