Resetting The Accumulated Time Indication; Connections - Sony WRR-805A Manual De Instrucciones

Resetting the Accumulated Time Indication

The time indication accumulates time in hours and minutes
when the WRR-805A/805B is on.
Reset the indication to "00:00" whenever you replace the
batteries so that it can display the running time of the
batteries.
1
Press the MODE button until the accumulated time
appears on the display.
2
Press the SET button.
Accumulated time
3
Press the – button.
The time indication resets to "00:00."
While you see "00:00" is flashing, you can go back to
previous value by pressing the + button.
4
Press the SET button.

Connections

Caution
When connecting the unit to a camcorder, be sure to turn the
unit off.
Connect the OUTPUT (BAL) connector to the microphone
input connector on DSR-250, DCR-VX2000 or other
camcorders by using the supplied cable.
To secure the output cable connection, be sure to turn and
lock the connector cover as illustrated below.
For attaching the unit to a camcorder, see "Use of the Soft
Case"on page 14.
To monitor audio output, connect the headphones to the
MONITOR connector. The monitoring level can be adjusted
by turning the MONITOR control.
11
(GB)