Hilti SR 30 Manual Del Usuario página 21

Ocultar thumbs Ver también para SR 30:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
▶ When cutting through pipes, hold the power tool above the level of the pipe you are cutting through.
▶ The power tool is not protected against ingress of moisture. Liquid running out of a pipe can cause a
short circuit in the power tool.
▶ Never cut into unknown materials and make sure the path of the saw is free of obstructions above and
below the workpiece.
▶ The power tool can kick back if the saw blade comes into contact with an obstructing object.
▶ Wear protective gloves also when changing the accessory tool. Touching the accessory tool presents a
risk of injury (cuts or burns).
▶ Engage the transport lock before storing or transporting the power tool.
▶ Comply with the manufacturer's instructions for handling and storing saw blades.
▶ The user and persons in the vicinity must wear suitable protective goggles, a hard hat, ear defenders,
protective gloves and light respiratory protection while the power tool is in use.
▶ Always use a saw blade of appropriate length. The saw blade must over the workpiece while the complete
Hubs stroke.
▶ Take breaks between working and do relaxation and finger exercises to improve the blood circulation in
your fingers.
▶ Do not look directly into the light source (LEDs) of the power tool and do not aim the beam at other
persons' faces. Risk of dazzling or eye damage.
▶ Flying fragments can injure the body and eyes. Wear your personal protective equipment and always
wear protective glasses and protective gloves.
▶ If work involves break-through, always secure the area on the side opposite where the work is carried
out.
▶ Always use saw blades that project at least 40 mm beyond the workpiece over the entire length of the
blade stroke. This can help to avoid violent kickback.
3
Description
3.1
Product overview
*2243029*
1
2243029
Blade holder
@
Mount for cutting assist
;
Folding scaffold hook (accessory)
=
Control switch
%
Rear grip
&
Electric supply cable
(
Attachment eye for lanyard
)
Front gripping area with unlocking/locking
+
button of the contact shoe
Saw blade release lever
§
Suction hose connector (accessory)
/
Contact shoe
:
Saw blade
Cutting assist (accessory)
$
English
15

Publicidad

Tabla de contenido
loading

Tabla de contenido