Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.1.3
Time
If the area for the time (21) is touched a number field
appears and the time can be input.
21
5.1.4
Language
After touching the area language and after that the
actual language a new screen appears showing all the
various languages available. Touch the language you
like to set the balancer
Picture shows the languages available at the time of printing
AD W9002 N
12.08.2013
5.1.5
Default values calibration
The calibration values that have been stored in the fac-
tory are taken over.
!
This function is useful when changes have been
made to the machine that have been faulty. In or-
der to secure a good accuracy of the machine it is
recommended to perform a new machine calibra-
tion
5.1.6
Unit for wheel data
The unit for wheel data can be set to INCH or MM.
5.1.7
Measurement units of the imbalance rea-
dings
044
The unit for imbalance readings can be set to GRAM or
OUNCES.
5.1.8
Rounding off
The following rounding can be set: 1 - 5 - 10.
Rounding off will display the balance results in multiples
of 5 grams e.g. 32 grams are shown on the display as 30
grams 33 grams are shown as 35 grams.
5.1.9
Suppression
The following suppression can be set: 3 - 5 - 10.
By suppressing the minor unbalance readings to 5 any
results less than 5 grams will be shown as 0.
045
49
Publicidad
Tabla de contenido
