Settings; Standard Settings; Starttext; Date - Nussbaum BM Touch Serie Manual De Instrucciones

5

Settings

5.1

Standard settings

Touching the area gets you to the
setting screen:
To change the standard setting touch the respective
area (18) to recall the setting. Then touch the value (19)
in order to chenge the value
Touch in order to save the data.
By touching the ESC button the Data
will NOT be saved and the entry screen
comes up.
48
Factory settings
- Mode STANDARD (12h).
- Imbalance values below 5 gram are displayed as 0
- Imbalance values are rounded to 5 g
- Autostart function set to close wheel guard and touch
- If the wheel guard is opened during the measuring run
5.1.1
This function is not active.
041
5.1.2
The actual date is displayed in various formats
- DD MM YYYY
- DD/MM/YYYY
- DD-MM-YYYY
- YYYY-MM-DD
- MM/DD/YYYY
- DD.MM.YYYY Factory setting
19
18
042
Surpression 5 g
Rounding 5 g
START
Autostart OFF
the wheel is stopped
Security ON

Starttext

Date

12.08.2013 AD W9002 N