Publicidad
Idiomas disponibles
Idiomas disponibles
PC 4100
KEY ILLUSTRATION
: Switch on / off, conversion weight unit, zero/tare
1. Replace new battery.
2. Scale overload. Remove item to avoid damage. Max. Weight capacity is
indicated on the scale.
WEIGHING
Strap the webbing belt through the luggage handle and secure the hook of the belt onto the
triangle ring.
Press the button to switch on the scale before lifting (ensure no stress).
When display shows zero, press the button again to reset LCD display to zero or tare.
Lift the scale gently. Make shows the weight of luggage. Wait for the weight reading to stop and
stabilize, flash 3 times and locked. Scale will display weight reading for 2 minutes and automatically
switch off.
When weight reading is locked, press the button to reset LCD display to zero. Then you can start
new weighing.
Press the button for 3 seconds to switch the scale off.
TO CONVERT WEIGHT UNIT
Press the button to switch on the device. Weight unit is flashing after LCD shows Zero.
Press the button to select weight unit. After idle for 3 seconds, the weight unit is set and you can
start weighing.
TO REPLACE BATTERY
Please, replace battery when LCD shows "Lo". Open battery case cover on the back of scale:
1. Take out the used battery with the aid of a sharp object;
2. Install new battery by putting one side of the battery beneath the battery baffle and then
pressing down the other side.
3. Please, observe the polarity.
CARE AND MAINTANCE
Wipe the scale with a slightly damp cloth. Do not immerse the scale in water or use chemical/
abrasive cleaning agents.
Do not stress the triangle ring for long time. During travel, keep the scale away from objects with
sharp ends (such as toy, stationery etc.), in case the scale is switched on frequently and consume
battery power.
To make sure accuracy, do not use this scale in strong magnetic field.
8
Publicidad
