Connecting To The Network; Getting Started - Pioneer SBX-B70 Guia De Incio Rapido

Connecting to the network

The following is one example of how to connect to a network.
For other connections, please refer to the attached Operating Instructions (CD-ROM)
Use "Start-up Navi" app to perform connection and initial settings
• Use a smartphone/tablet.
• Network connection is required.
1 Download and start "Start-up Navi" app.
2 Proceed along with the app guidance to perform connection and initial settings.

Getting started

Outputting the sound of a device connected to the unit
The following describes the procedure up until listening to the sound of a device connected to the unit.
1. Turn on the power of the connected device.
2. Press  STANDBY/ON to turn the power on.
3. Press INPUT SELECT or an input selection button on the remote control.
Switch to the input you wish to play and then start playback on the connected device.
4. Press the VOLUME to adjust the volume.
To temporarily mute the sound, press the MUTE.
Press the button again or adjust the volume to cancel mute.
4
En
LAN
Download "Start-up Navi" app from here.
 If you have an iPhone or iPod touch
Please search for "Start-up Navi" app
in the App Store.
 If you have an Android device
Please search for "Start-up Navi" app
in Google Play.
© 2015 PIONEER HOME ELECTRONICS CORPORATION.
All rights reserved.