Basic Functions - Electrolux EFC 6540 Manual De Instrucciones

Touch

Basic functions

control
When pressed the motor is set to the intensive speed
T5
timed to 5 minutes. At the end of 5 minutes of inten-
sive speed the hood starts again at the speed it was
set to previously. In case the hood is set to the inten-
sive speed directly from OFF-state it will then start
from the first speed after 5 minutes of intensive
speed.
When pressed for 4 seconds it resets the filter alarm
F
signal indicated by flashing of the touch control T1.
This procedure can be carried out only when the mo-
tor is stopped.
EN
Indicator lights
Touch control lit
Touch control lit Metal grease filters satu-
ration alarm. Metal grease
filters need to be washed.
The alarm starts up after
100 working hours.
Flashing touch Charcoal odour filter satu-
control ration alarm. Charcoal
filter has to be replaced
and metal grease filters
washed. The alarm starts
up after 200 working
hours. (Activation; check
the paragraph "Odour
filter")
1
18
8